The Design of an Integrated Crude Oil Distillation Column with Submerged Combustion Technology



Angela O. Mamudu1, *, Ebenezer Okonkwo2, Stephen I. Okocha3, Emeka E. Okoro4, Francis Elehinafe1, Kevin Igwilo5
1 Department of Chemical Engineering, Covenant University, Nigeria
2 Department of Chemistry, University of Port Harcourt, Nigeria
3 Department of Gas Engineering, University of Port Harcourt, Nigeria
4 Department of Petroleum Engineering, Covenant University Ota, Nigeria
5 Department of Petroleum Engineering, Federal University of Technology Owerri, Nigeria

Abstract

Objective:

Generally, Petroleum refineries are put in place to convert or refine unprocessed crude oil into more useful products using both physical separation and chemical conversion processes. Albeit, different refining unit are subsets of the physical separation category. The atmospheric and vacuum distillation unit seems to be more prominent. Conventionally, the crude atmospheric residue cannot be further heated in an atmospheric condition due to: coke formation, pipes plugging, thermal cracking and straining of the furnace. A vacuum distillation column is therefore required.

Methods:

This study, therefore, focuses on the limitations, “over straining of the furnace to provide the necessary heat” and “non-reliance on the additional re-boiler since it only acts as a heat exchanger”. An integrated distillation column with a capacity of 10,000 barrel per day was therefore designed for the concurrent production of all distillate cuts.

Results:

This was achieved through the introduction of a submerged combustion zone at the stripping section of the column where Naphtha was utilized as the source of fuel. Verification of this approach was also conducted using Autodesk invention software and a finite element analysis tool to evaluate both thermal and computational fluid analysis impact. Overall, all derived distilled products met the American Society for Testing and Material Standard Table 6.

Keywords: Combustion, Crude Oil, Design, Distillation, Submerged.


Abstract Information


Identifiers and Pagination:

Year: 2018
Volume: 12
Publisher Item Identifier: EA-TOCENGJ-2018-8

Article History:

Received Date: 24/7/2018
Revision Received Date: 23/8/2018
Acceptance Date: 31/8/2018
Electronic publication date: 23/10/2018
Collection year: 2018

© 2018 Mamudu et al.

open-access license: This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International Public License (CC-BY 4.0), a copy of which is available at: https://creativecommons.org/licenses/by/4.0/legalcode. This license permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.


* Address correspondence to this author at the Department of Chemical Engineering, Covenant University, Nigeria, Tel: 08102419058; E-mail: angela.mamudu@covenantuniversity.edu.ng