RESEARCH ARTICLE


Experimental Study on Rational Water Injection Rate in Continental Sandstone Reservoirs



Manping Yang1, , *, Lu Jiang1, Shuxiang Guo1, Liming Zheng1, Ling Meng1
1 Petroleum Engineering Department, Yanshan University, Hebei, China


Article Metrics

CrossRef Citations:
0
Total Statistics:

Full-Text HTML Views: 2370
Abstract HTML Views: 969
PDF Downloads: 476
ePub Downloads: 356
Total Views/Downloads: 4171
Unique Statistics:

Full-Text HTML Views: 1003
Abstract HTML Views: 482
PDF Downloads: 372
ePub Downloads: 271
Total Views/Downloads: 2128



Creative Commons License
© 2019 Yang et al.

open-access license: This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 International Public License (CC-BY 4.0), a copy of which is available at: https://creativecommons.org/licenses/by/4.0/legalcode. This license permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

* Address correspondence to this author at Petroleum Engineering Department, Yanshan University, Hebei, China; Tel: 15503350808;
E-mail: yangmp@ysu.edu.cn


Abstract

Objective:

In this paper, an experimental model of water flooding was designed and manufactured, and experiments on high permeability and low permeability models were carried out.

Methods:

The relationship between injection rate, injection pore volume multiple and oil displacement efficiency, injection rate, injection pore volume multiple and water content in two kinds of permeability was analyzed.

Results:

There is a certain relationship between oil displacement efficiency and water injection speed. There is a reasonable water injection speed, which can achieve the highest oil displacement efficiency. The lower the permeability the lower will be the reasonable injection rate . In the reasonable range of water injection rate, the injection rate increases gradually, and the best oil displacement effect can be obtained.

Conclusion:

Through analysis, it was concluded that the oil displacement efficiency of artificial rocks with various water injection rates was different even in the same permeability experimental model. It was indicated that the water flooding recovery of the reservoir can be improved by using the method of strong injection and strong production in the middle and later stage of development.

Keywords: Sandstone reservoir, Water drive, Injection rate, Injection pore volume multiple, Oil displacement efficiency, Permeability.